This Day In Space - August 16By KD Martin
Rocketdyne F-1 engine ↔August 16, 1961 - F-1 Engine The most powerful single nozzle engine ever built, the
F-1 for the Saturn V Apollo Missions, is test fired today. The F-1 uses liquid oxygen and RP-1 (kerosene) as fuel, at the rate of 43,882 gallons / minute. Previous tests showed instability in the nozzle due to improper fuel injector design. This test is succesful and any instabilities are self-damped within 1/10 second.
Five Rocketdyne F-1 engines will power the first stage, the S1-C, of the giant Saturn rocket. Each engine provides more than 1,500,000 pounds of thrust, for a total of 7,500,000 pounds of thrust for the S1-C.
The combined propellant flow rate of the five F-1s in the Saturn V is 3,357 US gallons (12,710 l) per second, which would empty a 30,000 US gallons swimming pool in 8.9 seconds. Each F-1 engine has more thrust than all three space shuttle main engines combined.
Notice the entire rocket stack shake as the 5 F-1 engines are ignited. It's difficult to imagine the power generated that can shake that monster Saturn V.

Saturn S-IVB ↔August 16, 1962 - Saturn S-IV Rocket The first successful test of the Saturn S-IV rocket is completed at the Douglas Aircraft Corporation. This rocket will be used as the second stage of the Saturn I and the third stage of the Saturn V Apollo Moon Rocket.
The S-IVB will provide the thrust needed for TLI, Trans Lunar Injection and is the "garage" for the Lunar Module (LM). Using the Rocketdyne J-2 engine, which is restartable, the S-IVB provides 200,000 pounds of thrust using liquid hydrogen and oxygen as propellants.

Saturn S-IVB cutaway ↔

Apollo 14 crew, Roosa is on the left ↔On this date in 1933, Astronaut
Stuart Roosa was born in Durango, CO. Roosa was CMP on the
Apollo 14 mission to the Moon.